Porelle® performance ECO is our new and growing range of bio-based membranes, developed in-house as part of our journey to reach our sustainability goals. This new development is a key part of our strategy to decouple from fossil fuel-based raw materials and reduce our carbon footprint, while continuing to manufacture and supply
high-performance membranes.
특징과 장점
.
Porelle® membranes은 군용 시장에 이상적인 광범위한 특징과 장점을 제공합니다. 여기에는 다음이 포함됩니다:
-
극한의 기상 조건
추위, 바람, 비, 젖은 환경 또는 고습 환경.
-
작업 환경
POL (석유, 기름, 액체) 내성, DEET (화학 살충제) 내성, 내염성.
-
사용 성능
내구성, 경량 및 유연성, 저마찰음, 높은 통기성 및 편안함, 세탁 또는 드라이클리닝.
The key impact of using bio-sourced materials is they allow us to recycle the carbon already existing within the atmosphere, not additional carbon into the environment.
The porelle® performance ECO range has a bio-based content > 40%, independently tested in accordance with method ASTM D6866: 2022.
100% of the biomaterial used in our polymer formulation is a derivative of starch, which has been produced from renewably sourced plant-based feedstocks, located in the USA.
주요 표준
기능성 복합원단에 대한 주요 테스트 표준에 대한 성능:
-
세탁 후 10,000 mm 내수압 방수
-
멤브레인 Ret 통기성 수치 < 1
-
2겹 멤브레인 Ret 통기성 수치 < 4
-
3겹 멤브레인 Ret 통기성 수치 < 8
-
– 40°C 냉간 균열 굴곡 테스트 및 다양한 기타 테스트 파라미터 통과.
OUR SUSTAINABLE JOURNEY
We share a global commitment to protect the environment and promote sustainability. To achieve this, we are continually reducing our carbon footprint across a number of areas by reviewing our processes, starting from the materials shipped in to the finished products shipped out. Also, we are paying close attention to all of our production methods, striving to minimise waste in all its forms.
주요 표준
기능성 복합원단에 대한 주요 테스트 표준에 대한 성능:
-
세탁 후 10,000 mm 내수압 방수
-
멤브레인 Ret 통기성 수치 < 1
-
2겹 멤브레인 Ret 통기성 수치 < 4
-
3겹 멤브레인 Ret 통기성 수치 < 8
-
– 40°C 냉간 균열 굴곡 테스트 및 다양한 기타 테스트 파라미터 통과.
.
Helping to reduce the use of fossil fuel-based
materials
Helping to reduce greenhouse gas emissions
(e.g. CO₂) in the atmosphere
Its inherent repellent properties which work in
synergy with C0 DWR treatments
Being a PFAS-free technology
Being produced using the renewable energy
generated by our wind turbine and solar
photovoltaic array on-site
Being a sustainable product solution commercially available today.
%20-%20134052872.jpg)
주요 표준
기능성 복합원단에 대한 주요 테스트 표준에 대한 성능:
-
세탁 후 10,000 mm 내수압 방수
-
멤브레인 Ret 통기성 수치 < 1
-
2겹 멤브레인 Ret 통기성 수치 < 4
-
3겹 멤브레인 Ret 통기성 수치 < 8
-
– 40°C 냉간 균열 굴곡 테스트 및 다양한 기타 테스트 파라미터 통과.
.
Continuous development to improve the
performance attributes of the porelle®
performance ECO range and aligning it with
different market requirements and end uses
Continuously working with supply chain partners
to develop next generation membranes with a
higher bio-based content
Replacing our current microporous product range
to achieve our strategic goal of transitioning to
bio-based technologies or other solutions that
enable us to decouple from fossil fuel-based
raw materials
Tripling our investment in our R&D infrastructure
to support a wide-ranging sustainable
development programme.
